GSX Level 2
-
- Ladehelfer
- Beiträge: 33
- Registriert: 16.02.2019 17:58
GSX Level 2
Servus zusammen,
Habe mir heute GSX Level 2 zugelegt. Leider habe Ich dort einen Grafik Fehler.
Habe alles nochmal deinstallier und neu installiert leider ohne Erfolg.
Gruß Dominik
Habe mir heute GSX Level 2 zugelegt. Leider habe Ich dort einen Grafik Fehler.
Habe alles nochmal deinstallier und neu installiert leider ohne Erfolg.
Gruß Dominik
Re: GSX Level 2
Das Thumbnail ist sehr klein. Kannst du mal ein größeres Bild von dem Grafikfehler reinstellen ?
1.) AMD Ryzen 3950X, 64 GB DDR4 G.Skill 3200 Trident RGB, Gigabyte 2080 Super Waterforce, M.2 Samsung Evo 970 500 GB, M.2 Samsung Evo 970 1TB, Samsung Evo 860 1TB SATA6
Betriebssysteme : Windows 10 Professional
-
- Ladehelfer
- Beiträge: 33
- Registriert: 16.02.2019 17:58
Re: GSX Level 2
Soviel ich weiß muss man bei GSX 2 einige Veränderungen vornehmen an den Gates/Finger. Es gibt dazu im Internet ( wahrscheinlich bei Avsim ) für diverse Airports fertige Config Files.
1.) AMD Ryzen 3950X, 64 GB DDR4 G.Skill 3200 Trident RGB, Gigabyte 2080 Super Waterforce, M.2 Samsung Evo 970 500 GB, M.2 Samsung Evo 970 1TB, Samsung Evo 860 1TB SATA6
Betriebssysteme : Windows 10 Professional
- MatthiasKNU
- Global Moderator
- Beiträge: 7314
- Registriert: 26.08.2012 11:26
Re: GSX Level 2
Nein, bei GSX 2 muss man da eigentlich nichts machen.
So wie das auf deinem Bild aussieht, ist da wohl mehr schief gelaufen.
Erstmal nur eine Frage - rein Interesse halber - Welcher Flughafen ist das?
Dann zu deinem Problem?
Hast du den FSX außerhalb Programme (x86) installiert? Startest du den FSX mit Admin-Rechten?
Hast du das GSX-Setup mit Admin-Rechten gestartet?
So wie das auf deinem Bild aussieht, ist da wohl mehr schief gelaufen.
Erstmal nur eine Frage - rein Interesse halber - Welcher Flughafen ist das?
Dann zu deinem Problem?
Hast du den FSX außerhalb Programme (x86) installiert? Startest du den FSX mit Admin-Rechten?
Hast du das GSX-Setup mit Admin-Rechten gestartet?
-
- Ladehelfer
- Beiträge: 33
- Registriert: 16.02.2019 17:58
Re: GSX Level 2
Also der Flughafen ist Nagasaki Airport.
Ja alles als Admin installiert und auch gestartet. Und ist auf separatem Laufwerk installiert. Gsx usw läuft soweit alles gut abgesehen dass die Reifen des Anhänger manchmal im Boden versinken. Der Fehler tritt erst auf wenn Passagiere aussteigen. Hab das Problem auch im Forum von fsdreamteam geschrieben.
The problem is caused by a setting or a tweak that shouldn't be used in the FSX.CFG. try all all these:
- Reset your video driver to default
- If that doesn't work, try to delete your FSX.CFG, so a new one will be created with all default settings. Apply only the HIGHMEMFIX = 1 tweak and nothing else, if you use FSX.
- If that doesn't work, be sure you are not running the sim or any of the addons that starts with it in Compatibility mode.
After resetting the FSX.CFG, you must reinstall GSX, otherwise it won't find its own Simobjects, because the FSX.CFG must be edited by the GSX installer.
The previous solution is the only one known to fix this problem, which happens only with FSX, when wrong tweaks or settings are applied to either the video card settings or the FSX.CFG settings.
Passengers works just fine on FSX, of course.
Do you have the old FSX SP2 maybe ? If yes, it's possible is one of the rendering bugs of SP2 which has been fixed with the Acceleration Pack and in the Steam version
Verwendet wird die NVIDIA Geforce GTX 1060 mit dem neusten Treiber und Windows 10. Habe den GSX auch schon mehrfach deinstalliert und wieder neu installiert. Den SP2 wird benötigt, da Ich ohne einen Graphic Fehler im Virtual Cockpit bekomme, wo die Bildschirme dann weiß sind.
Ja alles als Admin installiert und auch gestartet. Und ist auf separatem Laufwerk installiert. Gsx usw läuft soweit alles gut abgesehen dass die Reifen des Anhänger manchmal im Boden versinken. Der Fehler tritt erst auf wenn Passagiere aussteigen. Hab das Problem auch im Forum von fsdreamteam geschrieben.
The problem is caused by a setting or a tweak that shouldn't be used in the FSX.CFG. try all all these:
- Reset your video driver to default
- If that doesn't work, try to delete your FSX.CFG, so a new one will be created with all default settings. Apply only the HIGHMEMFIX = 1 tweak and nothing else, if you use FSX.
- If that doesn't work, be sure you are not running the sim or any of the addons that starts with it in Compatibility mode.
After resetting the FSX.CFG, you must reinstall GSX, otherwise it won't find its own Simobjects, because the FSX.CFG must be edited by the GSX installer.
The previous solution is the only one known to fix this problem, which happens only with FSX, when wrong tweaks or settings are applied to either the video card settings or the FSX.CFG settings.
Passengers works just fine on FSX, of course.
Do you have the old FSX SP2 maybe ? If yes, it's possible is one of the rendering bugs of SP2 which has been fixed with the Acceleration Pack and in the Steam version
Verwendet wird die NVIDIA Geforce GTX 1060 mit dem neusten Treiber und Windows 10. Habe den GSX auch schon mehrfach deinstalliert und wieder neu installiert. Den SP2 wird benötigt, da Ich ohne einen Graphic Fehler im Virtual Cockpit bekomme, wo die Bildschirme dann weiß sind.
-
- Ladehelfer
- Beiträge: 33
- Registriert: 16.02.2019 17:58
Re: GSX Level 2
Habe alles schon versucht leider ohne Erfolg. Hat noch jemand eine idee?
- MatthiasKNU
- Global Moderator
- Beiträge: 7314
- Registriert: 26.08.2012 11:26
Re: GSX Level 2
Hast du auch schon die fsx.cfg mal gelöscht?
-
- Ladehelfer
- Beiträge: 33
- Registriert: 16.02.2019 17:58
Re: GSX Level 2
Jap habe Ich auch gemacht.
-
- Ladehelfer
- Beiträge: 33
- Registriert: 16.02.2019 17:58
Re: GSX Level 2
Also Umberto von FSDREAMTEAM sagt es würde am Service Pack 2 liegen und an der FSX Version. Mit der Steam Version wären die Probleme nicht. Aber das halte Ich für ein schlechten Witz.